Deutsch (Deutschland)
Español (España)
Français (France)
Magyar (Magyarország)
Nederlands (Nederland)Grey 0.25 meter LSZH U/FTP CAT6A datacenter slimline patch cable snagless with RJ45 connectors
Item No.DC7052
- Cable length: 0.25 m
- Full copper 32AWG wires, 50µ gold RJ-45 contacts
- Outer diameter jacket of only 3.8mm to improve air flow in cabinets
- Snagless boots
- For connecting two active devices e.g. a switch and a nas
- Specifications comply to international standards
- Cables are 100% tested
- 5 Year warranty
CAT6A U/FTP slimline datacenter ethernet cables are smaller in diameter (3.8mm vs 5.9mm) than regular CAT 6A patch cords. The bending radius is lower in comparison with regular patch cords. This results in a better airflow in the server rack/network cabinet.
Although, ISO/IEC and TIA standards describe the use of patch cords between 22 and 28 AWG, it is possible to use 32 AWG patch cables. This results in a higher attenuation, particularly at higher frequencies.
Although, ISO/IEC and TIA standards describe the use of patch cords between 22 and 28 AWG, it is possible to use 32 AWG patch cables. This results in a higher attenuation, particularly at higher frequencies.
Description
- Cable length: 0.25 m
- Full copper 32AWG wires, 50µ gold RJ-45 contacts
- Outer diameter jacket of only 3.8mm to improve air flow in cabinets
- Snagless boots
- For connecting two active devices e.g. a switch and a nas
- Specifications comply to international standards
- Cables are 100% tested
- 5 Year warranty
CAT6A U/FTP slimline datacenter ethernet cables are smaller in diameter (3.8mm vs 5.9mm) than regular CAT 6A patch cords. The bending radius is lower in comparison with regular patch cords. This results in a better airflow in the server rack/network cabinet.
Although, ISO/IEC and TIA standards describe the use of patch cords between 22 and 28 AWG, it is possible to use 32 AWG patch cables. This results in a higher attenuation, particularly at higher frequencies.
Although, ISO/IEC and TIA standards describe the use of patch cords between 22 and 28 AWG, it is possible to use 32 AWG patch cables. This results in a higher attenuation, particularly at higher frequencies.
Specifications
- Product category
- Cables / Twisted pair patch / CAT6A U/FTP
- Cable length
- 0.25 m
- Connector type
- RJ45
- Connector A
- RJ45 male (x1)
- Connector B
- RJ45 male (x1)
- Contact plating
- Gold plated
- Connector contact plating
- Gold plated
- Mating cycles
- 750
- Shielding type
- U/FTP
- Category
- CAT6A
- Conductor material
- Copper
- Wire gauge
- 32 AWG
- Outer jacket
- LSZH
- Impedance
- 100 ?
- Bandwidth
- 500 MHz
- Cable colour
- Grey
- Colour number
- RAL 7035
- Min. working temperature
- -20 °C
- Max.working temperature
- 75 °C
- Warranty (years)
- 5
- EAN code
- 8716065441246
Reviews (0)
There are no reviews yet.
Related items
Item No.DC7030
Item No.DC7000
Item No.DC7001
Item No.DC7051
Item No.DC7002
Item No.DC7003
Item No.DC7005
Item No.DC7007
Item No.DC7010Grey 0.25 meter LSZH U/FTP CAT6A datacenter slimline patch cable snagless with RJ45 connectors
Item No.DC7052
- Cable length: 0.25 m
- Full copper 32AWG wires, 50µ gold RJ-45 contacts
- Outer diameter jacket of only 3.8mm to improve air flow in cabinets
- Snagless boots
- For connecting two active devices e.g. a switch and a nas
- Specifications comply to international standards
- Cables are 100% tested
- 5 Year warranty
CAT6A U/FTP slimline datacenter ethernet cables are smaller in diameter (3.8mm vs 5.9mm) than regular CAT 6A patch cords. The bending radius is lower in comparison with regular patch cords. This results in a better airflow in the server rack/network cabinet.
Although, ISO/IEC and TIA standards describe the use of patch cords between 22 and 28 AWG, it is possible to use 32 AWG patch cables. This results in a higher attenuation, particularly at higher frequencies.
Although, ISO/IEC and TIA standards describe the use of patch cords between 22 and 28 AWG, it is possible to use 32 AWG patch cables. This results in a higher attenuation, particularly at higher frequencies.
Description
- Cable length: 0.25 m
- Full copper 32AWG wires, 50µ gold RJ-45 contacts
- Outer diameter jacket of only 3.8mm to improve air flow in cabinets
- Snagless boots
- For connecting two active devices e.g. a switch and a nas
- Specifications comply to international standards
- Cables are 100% tested
- 5 Year warranty
CAT6A U/FTP slimline datacenter ethernet cables are smaller in diameter (3.8mm vs 5.9mm) than regular CAT 6A patch cords. The bending radius is lower in comparison with regular patch cords. This results in a better airflow in the server rack/network cabinet.
Although, ISO/IEC and TIA standards describe the use of patch cords between 22 and 28 AWG, it is possible to use 32 AWG patch cables. This results in a higher attenuation, particularly at higher frequencies.
Although, ISO/IEC and TIA standards describe the use of patch cords between 22 and 28 AWG, it is possible to use 32 AWG patch cables. This results in a higher attenuation, particularly at higher frequencies.
Specifications
- Product category
- Cables / Twisted pair patch / CAT6A U/FTP
- Cable length
- 0.25 m
- Connector type
- RJ45
- Connector A
- RJ45 male (x1)
- Connector B
- RJ45 male (x1)
- Contact plating
- Gold plated
- Connector contact plating
- Gold plated
- Mating cycles
- 750
- Shielding type
- U/FTP
- Category
- CAT6A
- Conductor material
- Copper
- Wire gauge
- 32 AWG
- Outer jacket
- LSZH
- Impedance
- 100 ?
- Bandwidth
- 500 MHz
- Cable colour
- Grey
- Colour number
- RAL 7035
- Min. working temperature
- -20 °C
- Max.working temperature
- 75 °C
- Warranty (years)
- 5
- EAN code
- 8716065441246
Reviews (0)
There are no reviews yet.
Related items
Item No.DC7030Item No.DC7000Item No.DC7001Item No.DC7051Item No.DC7002Item No.DC7003Item No.DC7005Item No.DC7007Item No.DC7010