Grey 5 meter LSZH U/UTP CAT6 datacenter slimline patch cable with RJ45 connectors

Item No. DC9005
  • Full copper 28AWG wires, 50µ gold RJ-45 contacts.
  • Outer diameter jacket of only 3.8mm to improve air flow in cabinet
  • Snagless boots.
  • For channel applications.
  • Specifications comply to international standards
  • Cables are 100% tested.
  • 5 Year warranty.
CAT6 U/UTP slimline datacenter ethernet cables are smaller in diameter (3.8mm vs 5.9mm) than regular CAT 6 patch cords and the bending radius is lower in compare with regular patchcords. All this results in a better airflow in the cabinet.

Altough ISO/IEC and the TIA standards describe the use of patch cords between 22 and 26 AWG it's possible to use 28 AWG patchcables but this will result in a higher attenuation, particularly at higher frequencies.

ACT therefore recommends a shorter permanent link length than with regular 24 AWG patchcords to accommodate this higher attenuation.

ACT advise a maximum bundle size of 24 cables in PoE applications to assist in limiting the temperature increases in the cables associated with delivering PoE deployments. Current standards (ANSI TSB-184-A)
work limits the maximum temperature increase to less than 15 degrees Celsius above ambient for the centre cable in a bundle.
This product cannot be ordered at the moment.
Description
  • Full copper 28AWG wires, 50µ gold RJ-45 contacts.
  • Outer diameter jacket of only 3.8mm to improve air flow in cabinet
  • Snagless boots.
  • For channel applications.
  • Specifications comply to international standards
  • Cables are 100% tested.
  • 5 Year warranty.
CAT6 U/UTP slimline datacenter ethernet cables are smaller in diameter (3.8mm vs 5.9mm) than regular CAT 6 patch cords and the bending radius is lower in compare with regular patchcords. All this results in a better airflow in the cabinet.

Altough ISO/IEC and the TIA standards describe the use of patch cords between 22 and 26 AWG it's possible to use 28 AWG patchcables but this will result in a higher attenuation, particularly at higher frequencies.

ACT therefore recommends a shorter permanent link length than with regular 24 AWG patchcords to accommodate this higher attenuation.

ACT advise a maximum bundle size of 24 cables in PoE applications to assist in limiting the temperature increases in the cables associated with delivering PoE deployments. Current standards (ANSI TSB-184-A)
work limits the maximum temperature increase to less than 15 degrees Celsius above ambient for the centre cable in a bundle.
Specifications
Product category CAT6 patch cables U/UTP
Cable length 5 m
Connector type RJ45
Connector A RJ45 male (x1)
Connector B RJ45 male (x1)
Contact plating Gold plated
Mating cycles 750
Shielding type U/UTP
Category CAT6
Conductor material Copper
Wire gauge 28 AWG
Outer jacket LSZH
Bandwidth 250 MHz
Cable colour Grey
Colour number RAL 7035
Min. working temperature -20 °C
Max.working temperature 60 °C
Warranty (years) 5
EAN code 8716065404418
    Loading
    Loading